ABLB65 series full automatic blow molding machine with a auto-deflashing unit. It helps you save labor cost at 200%.A wide variety of materials can be used for this machine,which specialize in making various oil barrels and related bottles not over 5 L.The clamping system is a high-precision single-station linear guide,extrusion system use a hard gear and inverter imported from Japan.The die head system adopt central-incoming extrusion die made of special steel to ensure the quality of the products.Imported hydraulic valve and seal valve with proportional control valve.Control system consist of PLC and human machine interface imported from Japan.
◆ PLC adds the man-machine interface, the touching type is operated, it is convenient to be simple and direct.
◆ One pair of Iow plastification systems of Senior One, energy-efficient,mix and smelt outstandingly.
◆ The centre enters the material, the pushing out of the mould head of many patterns, remove and make and converge the line completely, meet the demands of different structure products.
◆ Two parallel, the mould organization of translation, the centre locks the mould, balance the strength of receiving,move rapidly, put it in place gentlely.
Related technical parameter:
|
Max. Product volume
|
5 liters
|
Dry cycle
|
1000pc/h
|
|
Screw diameter
|
65mm
|
Screw L/D ratio
|
24 L/D
|
|
Screw drive power
|
18.5 KW
|
Screw heating capacity
|
5-6 KW
|
|
No.of heating zone
|
3 zones
|
Output of HDPE
|
80 KG/H
|
|
Oil pump drive power
|
7.5 KW
|
Clamping force
|
65 KN
|
|
Max.size of mold
|
330X370mm
|
Mold stroke
|
148-568mm
|
|
Max.die diameter
|
160mm
|
Blow pressure
|
0.6mpa
|
|
Air volume
|
0.5 M³/MIN
|
Cooling water pressure
|
0.3mpa
|
|
Water consumption
|
50 L/MIN
|
|
|
